A VCXO (voltage controlled crystal oscillator) is similar to a clock oscillator except that the frequency of a VCXO may be varied by changing a control voltage on Pin 1 of the device.
| SERIES | FEATURES | DIMENSIONS (mm) | FREQUENCY RANGE | Output | DATA SHEET | RoHS | |
 |
V500 | Thru Hole Half DIP Metal Can |
12.8 x 12.8 x 5.1 | 1 - 200MHz | CMOS |
 |
 |
 |
V1000 | Thru Hole Full DIP Metal Can | 20.7 x 13.06 x 5.1 | 1 -200MHz | CMOS |
|
|
 |
V2500TL | Ceramic SMD Low Jitter |
14.2 x 9.3 x 5.4 | 1.5 - 200MHz | LVDS |
|
|
 |
V2500TLP | Ceramic SMD Low Jitter |
14.2 x 9.3 x 5.4 | 1.5 - 200MHz | LVPECL |
|
|
 |
V3000P | Ceramic SMD Programmable Wide Pull Range |
7.0 x 5.0 x 1.85 | 10 - 200MHz | LVPECL | |
|
 |
V3000T | Ceramic SMD High Frequency Tight Stability | 7.0 x 5.0 x 1.8 | 1 - 300MHz | CMOS | |
|
 |
V3000TL | Ceramic SMD Multiplier |
7.0 x 5.0 x 1.85 | 9.5 - 622.08MHz | LVDS | |
|
 |
V3000TLP | Ceramic SMD Low Stability |
7.0 x 5.0 x 1.85 | 9.5 - 622.08MHz | LVPECL | |
|
 |
V3000TLP-A | Ceramic SMD Low Jitter Up to 800 MHz |
7.0 x 5.0 x 1.5 | 120-800MHz | LVPECL | |
|
 |
V3000TLP-M | Ceramic SMD Up to 800 MHz |
7.0 x 5.0 x 1.5 | 100-800MHz | LVPECL | |
|
 |
V4000 | Ceramic SMD High Frequency Tight Stability |
5.0 x 3.2 x 1.6 | 1 - 300MHz | CMOS | |
|
 |
V4000TL | Ceramic SMD Non-Multiplied |
5.0 x 3.2 x 1.36 | 60 -175MHz | LVDS | |
|
 |
V4000TLP | Ceramic SMD Non-Multiplied |
5.0 x 3.2 x 1.36 | 60 -175MHz | LVPECL | |
|
 |
V5000 | Ceramic SMD Tri-state Enable |
3.2 x 2.5 x 1.3 | 1.25 - 55MHz | CMOS | |
|